In the iMovie app on your Mac, press and hold the R key, and drag across a clip in the timeline to select the range of frames you want to keep. Control-click the clip, and choose Trim Selection from the shortcut menu. The clip is trimmed to the boundaries of the selection. The output videos could fit on DaVinci Resolve 17, 16, 15 and 14 perfectly. And meanwhile click 'Browse' button to specify a destination folder for the final output files. Tip: Advanced V/A settings Click 'Settings' button if you'd like to customize advanced audio and video parameters like Video Codec, aspect ratio, bit rate, frame rate.
To have finer control over how one video clip flows into the next, you can use the Precision Editor.
The Precision Editor is an editing tool that allows you to modify the point at which one clip transitions into the next, trimming or extending frames at the end of one clip and at the beginning of the next clip in the same magnified view. In the Precision Editor, you can see both clips on either side of a transition, and you can see and work with the unused frames from both clips. As you make changes, you can instantly watch to see how your edits affect the transition from one clip to the next.
The Precision Editor also lets you reposition and trim other project elements, including transitions you've added between clips, audio and sound effects, titles, chapter and comment markers, cutaways, picture-in-picture clips, side-by-side (split screen) clips, and green-screen and blue-screen clips, all in the same magnified view.
To edit the transition point between two clips:
In the Project browser, move the pointer over a clip, and then choose Precision Editor from the blue Action pop-up menu (looks like a gear) that appears.
Or, double-click the gap between two clips with no transition between them.
The Precision Editor opens. In the bottom portion, it shows the clip you started from (A, below), and in the top portion it shows the clip before it (B, below). Or it shows the clips on either side of the gap you clicked.
The transition point between the two clips is represented by a vertical blue line (C, below). The non-shaded frames on either side of the line are the video that plays before and after the transition point (A and B, below). The shaded frames are video that you didn't use in your project (D, below).
To change where the transition point is, do any of the following:
Change the frame before the transition point: Move your pointer over the clip in the top portion of the Precision Editor, on either side of the vertical blue line. The viewer plays the video as your pointer moves. Click when you see the frame where you want the transition to start. The clip in the Precision Editor shifts so that the frame you clicked is at the 'cut point' where one clip ends and the next begins. This action either extends or shortens the clip, depending on where you set the new cut point.
You can also drag the clip, stopping when the viewer shows the frame you want at the cut point.
Change the frame after the transition point: Move your pointer over the clip in the bottom portion of the Precision Editor, on either side of the vertical blue line. The viewer plays the video as your pointer moves. Click when you see the frame you want after the transition. The clip in the Precision Editor shifts so that the frame you clicked is at the 'cut point' where one clip ends and the next begins. This action either extends or shortens the clip, depending on where you set the new cut point.
You can also drag the clip, stopping when the viewer shows the frame you want at the cut point.
Reposition the transition point between the two clips: Drag the transition point handle (the blue dot on the vertical blue line) to the left or right. This action trims frames from a clip on one side of the transition while extending the clip on the other side. The total duration of your project stays the same.
As you reposition a transition point, the viewer shows the endpoint of the clip before the transition. To make the viewer show the startpoint of the clip following the transition instead, hold down the Option key as you drag the transition point handle.
To preview your work at any time, move the pointer over the horizontal gray divider between the upper and lower clips. The playhead (the red vertical line) should be to the left of the blue transition line.
Skim the transition by moving the pointer along the divider; play it by pressing the Space bar. Press the Space bar again to stop playing it.
You can also skim any element in the Precision Editor, such as the unused portion of a clip, by moving the pointer over it.
Click Done in the upper-right corner of the Precision Editor.
To edit a transition between two clips:
Editing or repositioning a transition trims frames from one clip while extending the other.
In the Project browser, move the pointer over a transition icon, and then choose Precision Editor from the Action pop-up menu (looks like a gear) that appears below it.
The Precision Editor opens. The top portion shows the clip before the transition, and the bottom portion shows the clip after it.
The transition itself, represented by a horizontal blue bar, appears between the two vertical blue lines.
Do one of the following:
Extend or shorten the transition: Position your pointer over either end of the horizontal blue bar, shown below, and drag right or left.
If you can't extend a transition, it means there aren't any unused video frames available on the end of the clip you're working with.
Reposition the transition without changing its length: Position the pointer over the blue bar until it turns into a hand, and then drag right or left. You can also simply drag the video clip before or after the transition to change where it starts and ends.
To preview your work at any time, move the pointer over the horizontal gray divider between the upper and lower clips. The playhead (the red vertical line) should be to the left of the transition.
Skim the transition by moving the pointer along the divider; play it by pressing the Space bar. Press the Space bar again to stop playing it.
You can also skim any element in the Precision Editor, such as the unused portion of a clip, by moving the pointer over it.
Click Done in the upper-right corner of the Precision Editor.
To edit other project elements using the Precision Editor:
Fluid browser 1 6 32. With the Precision Editor open, click the Extras button at the top.
Colored bars appear above and below the clips to represent the sound effects, titles, chapter and comment markers, cutaways, picture-in-picture clips, and blue- and green-screen clips you've added to your project.
Drag any element from the center to reposition it, or drag either end to shorten or lengthen it (you can't change the length of some elements).
You can also use the Precision Editor to extend the audio from one clip so that it overlaps the next clip.
- How to edit vertical videos in iMovie
by Bill White 3 years ago
How to edit vertical videos in iMovie
Many times I happened to record a video on my smartphone and find out later it's vertically orientated. Sharing a vertical video on Facebook or YouTube might ruin your viewers' playback experiences. This guide will teach you how to fix the aforementioned issue and other similar ones by using the iMovie application.
iMovie is a popular video editing utility developed by the Apple company. With its help, you can play, create, edit, and share your homemade movies. The application works with a wide variety of video formats, provides you with many editing options, and generates quality output files. It might prove to be of good use if you need it for editing the vertical clip you recorded on your smartphone.
Rotate vertical videos with iMovie
This integrated editing option comes in handy if you need to immediately convert a video recorded in portrait mode to landscape format.
1. Launch the iMovie application on your Mac.
2. Import the vertical movie you wish to edit from its folder location.
Importing Vertical Video
3. Select it from the library field. On the upper-right side of the interface, you will see a cropping icon. Click it to reveal the video crop and rotate options.
4. Click the indicated arrow buttons to rotate 90 degrees. You can always undo project alterations if needed.
5. Press the 'Done' button.
Crop vertical videos with iMovie
The cropping editing options might prove to be of good use if you need to focus on a certain part of the imported clip.
1. Launch the iMovie application on your Mac.
2. Import the vertical movie you wish to edit from its folder location.
How To Keep Videos Vertical In Imovie Converter
3. Select it from the library field. On the upper-right side of the interface, you will see a cropping icon. Click it to reveal the video crop and rotate options.
4. Click the 'Crop' button. Drag the corners of the green area to change size and position of the video part you wish to crop.
Apple macbook pro yosemite. Hp laserjet p2055dn printer remote firmware update 20090430. Cropping Vertical Video
5. Press the 'Done' button.
Apply visual effects to vertical videos with iMovie
iMovie comes with multiple visual effects which help you transform your homemade clips into stunning works of art. Here's what you need to do in order to apply one of the offered visual effects:
1. Select the vertical video from the library field (you can also apply a visual effect for a certain segment from a movie - select the area from the timeline section).
2. Click the 'Video Effect' button.
Selecting Video Effect Option
3. Select the preferred clip filter.
Choosing Visual Effect
How To Keep Videos Vertical In Imovie Editing
Conclusion
iMovie proves to be a reliable solution for editing vertical clips. It provides you with many built-in editing options and preserves the quality of the original files. And since the application is integrated into every OS X and is free-to-use, I can't find any reasons why you shouldn't use it for completing vertical video editing tasks.
Alternative downloads
- Adobe PremiereElementsAdobe PremiereElements just gotbetter. Now you cancreate quick moviesfrom..$299.97 DOWNLOAD
- Adobe Premiere Pro CS6Adobe Premiere Pro CS6software combinesincredible performancewith a sleek..DOWNLOAD
- Final Cut ProFinal Cut Pro is videoediting software.Completely redesignedfrom the ground..DOWNLOAD
- Photo Movie Maker -Fantashow★★★★ Afterthat next vacation orreunion, create aneye-catching showcasefor..DOWNLOAD
- ShotcutShotcut is a free,open source,cross-platform videoeditor. This appsupports..FREE DOWNLOAD
- Wondershare FilmoraWondershare Filmora Xfor mac is anintuitive, easilymastered, videoediting..$69.99 DOWNLOAD
